+603 - 7803 0158

Desiccator

Desiccators are drying units either standard or custom made which are used to fit a wide range of applications. Many units have combined Humidity Indicators fitted. This enables the desiccators to change colour when moisture is apparent, valves can also be added to various desiccators to vent gas when necessary.


Metal Panel Mounting Desiccators

Panel mounted desiccators provide protection against corrosion, dampness and contamination in electronic, electrical, telecommunications, computer equipment etc. These desiccators incorporate a humidity indicator, which monitors saturation and indicates when desiccant change or cartridge replacement is required. They are blue when the desiccant is dry and turn pink when the maximum amount of moisture has been adsorbed.

A powerful adsorbing agent (either silica gel or molecular sieves) reduces the existing or incoming moisture to acceptable levels. The use of molecular sieve desiccant is recommended when the equipment may be subject to immediate failure as a result of water vapour condensation. The molecular sieve desiccant maintains an ultra low relative humidity for extremely sensitive applications. It is most suitable for applications where equipment or enclosures may be subject to operation at low temperatures and water vapour condensation must not occur.

20g and 40g Silica Gel and Molecular Sieve

100g Silica Gel Filled Unit

38g Silica Gel Filled Unit

2g to 45g Silica Gel Filled Unit

45g Molecular Sieve Unit

2g to 8g Silica Gel Filled Unit

2g to 12g Silica Gel Filled Unit

11g Molecular Sieves Filled Unit

40g Silica Gel and Molecular Sieve Filled Units

Small Panel Mounting & Stick Desiccators

Panel mounted desiccators provide protection against corrosion, dampness and contamination in electronic, electrical, optical, electro-optical, telecommunications, computer equipment etc. These desiccators incorporate a humidity indicator, which monitors saturation and indicates when desiccant change or cartridge replacement is required. They are blue when the desiccant is dry and turn pink when the maximum amount of moisture has been adsorbed.

A powerful adsorbing agent (either silica gel or molecular sieves) reduces the existing or incoming moisture to acceptable levels. The use of molecular sieve desiccant is recommended when the equipment may be subject to immediate failure as a result of water vapour condensation. The molecular sieve desiccant maintains an ultra low relative humidity for extremely sensitive applications. It is most suitable for applications where equipment or enclosures may be subject to operation at low temperatures and water vapour condensation must not occur.

Silica Gel and Molecular Sieve Filled Unit

Silica Gel and Molecular Sieve Filled Unit

Molecular Sieve Stick Desiccator

Silica Gel Filled Unit

Molecular Sieve Filled Unit

Molecular Sieve Screw Desiccator

Molecular Sieve Stick Desiccator

Plastic Panel Mounting Desiccators

Panel mounted desiccators provide protection against corrosion, dampness and contamination in electronic, electrical, telecommunications, computer equipment etc. These desiccators incorporate a humidity indicator, which monitors saturation and indicates when desiccant change or cartridge replacement is required. They are blue when the desiccant is dry and turn pink when the maximum amount of moisture has been adsorbed.

A powerful adsorbing agent (either silica gel or molecular sieves) reduces the existing or incoming moisture to acceptable levels. The use of molecular sieve desiccant is recommended when the equipment may be subject to immediate failure as a result of water vapour condensation. The molecular sieve desiccant maintains an ultra low relative humidity for extremely sensitive applications. It is most suitable for applications where equipment or enclosures may be subject to operation at low temperatures and water vapour condensation must not occur.

The silica gel desiccators can be reactivated for re-use by heating them at 120 deg C (248 deg F) for four hours in a ventilated oven. The molecular sieve desiccators cannot be reactivated.

1g to 17g Molecular Sieves Filled Units

5g Molecular Sieve Filled Unit

50g Silica Gel Filled Unit

50g Molecular Sieve Filled Unit

30g Silica Gel Filled Unit

30g Molecular Sieve Filled Unit

10g Silica Gel Filled Unit

10g Molecular Sieve Filled Unit

Breather Desiccators
Breather desiccators provide protection against corrosion, dampness and contamination in electronic, electrical, optical, electro-optic, telecommunications, computer equipment etc. These desiccators incorporate a humidity indicator, which monitors saturation and indicates when desiccant change or cartridge replacement is required. They are blue when the desiccant is dry and turn pink when the maximum amount of moisture has been adsorbed.
A powerful adsorbing agent (either silica gel or molecular sieves) reduces the existing or incoming moisture to acceptable levels. The use of molecular sieve desiccant is recommended when the equipment may be subject to immediate failure as a result of water vapour condensation. The molecular sieve desiccant maintains an ultra low relative humidity for extremely sensitive applications. It is most suitable for applications where equipment or enclosures may be subject to operation at low temperatures and water vapour condensation must not occur.

Silica Gel Filled Unified Thread Units, Ranging From 5g to 400g

Molecular Sieve Filled Unified Thread Units, Ranging From 5g to 400g

Molecular Sieve Filled 3g Unified Thread Unit

Silica Gel Filled Metric Thread Units, Ranging From 5g to 400g

Molecular Sieve Filled Metric Thread Units, Ranging From 5g to 400g

Silica Gel Filled Metric Thread & R.F Screened Units, Ranging From 5g to 400g

Molecular Sieve Filled Metric Thread & R.F Screened Units, Ranging From 5g to 400g

Molecular Sieve Filled 3g Unified Thread & R.F. Screened Unit

5g Molecular Sieve Filled Dehumidifier Unit

5g Molecular Sieve Filled Dehumidifier Unit

3g Molecular Sieve and Silica Gel Filled Unit)

2g Molecular Sieve Unit

Molecular Sieve Filled Customer Breather.

High Voltage Motor Protection Units

High voltage motor protection desiccators provide protection against corrosion, dampness and contamination in electrical, high voltage motors and switchgear. These desiccators incorporate a humidity indicator, which monitors saturation and indicates when desiccant change or cartridge replacement is required. They are blue when the desiccant is dry and turn pink when the maximum amount of moisture has been adsorbed.

A powerful adsorbing agent (either molecular sieve or silica gel) reduces the existing or incoming moisture to acceptable levels. The use of molecular sieve desiccant is recommended when the equipment may be subject to immediate failure as a result of water vapour condensation. The molecular sieve desiccant maintains an ultra low relative humidity for extremely sensitive applications. It is most suitable for applications where equipment or enclosures may be subject to operation at low temperatures and water vapour condensation must not occur.

Silica Gel Filled Desiccator)

Silica Gel Filled Desiccator

Silica Gel Filled Desiccator

2g to 8g Silica Gel Filled Unit

Tubular Desiccators

Tubular desiccators provide protection against corrosion, dampness and contamination in electronic, electrical, optical, electro-optical, telecommunications, computer equipment etc. These desiccators do not incorporate a humidity indicator; however they can be fitted to a separate humidity indicator or mounting plug for panel mounting onto equipment.

A powerful adsorbing agent (either molecular sieve or silica gel) reduces the existing or incoming moisture to acceptable levels. The use of molecular sieve desiccant is recommended when the equipment may be subject to immediate failure as a result of water vapour condensation. The molecular sieve desiccant maintains an ultra low relative humidity for extremely sensitive applications. It is most suitable for applications where equipment or enclosures may be subject to operation at low temperatures and water vapour condensation must not occur.

2g to 8g Molecular Sieve & Silica Gel Non-refillable Desiccator With Unified Thread

2g to 8g Molecular Sieve & Silica Gel Non-refillable Desiccator With Metric Thread

2g to 8g Molecular Sieve & Silica Gel Non-refillable Desiccator With Metric Thread

2g to 8g Molecular Sieve & Silica Gel Non-refillable Desiccator With Unified Thread

25g to 45g Molecular Sieve & Silica Gel Refillable Desiccator With Metric Thread

10g to 15g Molecular Sieve & Silica Gel Refillable Desiccator With Metric Thread

4g Molecular Sieve Refillable Desiccator With Metric Thread

12g Molecular Sieve Refillable Desiccator With Metric Thread

Hydrocarbon Adsorption Units

Hydrocarbon adsorption units are filled with an activated carbon material to adsorb hydrocarbon vapours, aviation fuel vapours as well as other various contaminants.

They are most commonly used on airborne applications that may be subjected to these contaminants i.e. in electronic, electrical, optical, and electro-optical equipments that may be drawn into the equipment whilst the aircraft is on the ground.

Metric Thread & R.F. Screened 8g Activated Carbon Unit

Metric Thread 6 & 8g Activated Carbon Unit

6g Activated Carbon Unit

10g to 22g Combined Molecular sieve & Carbon Ultra Clean Units

Ultra Clean Desiccators

Ultra Clean desiccators provide protection against corrosion, dampness and contamination in optical, electro-optical, telecommunications, computer equipment etc. These desiccators do not incorporate a humidity indicator; however they can be fitted to a separate humidity indicator or relief valve for panel mounting onto equipment.

A powerful adsorbing agent in the form of molecular sieve reduces the existing or incoming moisture to acceptable levels. The use of molecular sieve desiccant is recommended when the equipment may be subject to immediate failure as a result of water vapour condensation. The molecular sieve desiccant maintains an ultra low relative humidity for extremely sensitive applications. It is most suitable for applications where equipment or enclosures may be subject to operation at low temperatures and water vapour condensation must not occur.

10g to 22g Molecular Sieve Filled Ultra Clean Desiccators.

2g to 8g Molecular Sieve Filled Ultra Clean Desiccator

3g Molecular Sieve Filled Ultra Clean Desiccator

Free Standing Desiccators

Panel mounted desiccators provide protection against corrosion, dampness and contamination in electronic, electrical, telecommunications, computer equipment etc. These desiccators incorporate a humidity indicator, which monitors saturation and indicates when desiccant change or cartridge replacement is required. They are blue when the desiccant is dry and turn pink when the maximum amount of moisture has been adsorbed.

A powerful adsorbing agent (either silica gel or molecular sieves) reduces the existing or incoming moisture to acceptable levels. The use of molecular sieve desiccant is recommended when the equipment may be subject to immediate failure as a result of water vapour condensation. The molecular sieve desiccant maintains an ultra low relative humidity for extremely sensitive applications. It is most suitable for applications where equipment or enclosures may be subject to operation at low temperatures and water vapour condensation must not occur.

Molecular Sieve Desiccant Box

Molecular Sieve Desiccant Box

Molecular Sieve Desiccant Box With Mounting Point

Molecular Sieve Desiccant Box

Molecular Sieve Desiccant Box

Silica Gel Desiccant Box

10g Indicating Silica Gel Container

Silica Gel Pylon

Pipeline Desiccators

Pipeline Desiccators are designed to be fitted to compressed gas lines to remove moisture from the gas stream.

A powerful adsorbing agent (either molecular sieve or silica gel) reduces the moisture within the gas stream to acceptable levels. The use of molecular sieve desiccant is recommended when the equipment may be subject to immediate failure as a result of water vapour condensation. The molecular sieve desiccant maintains an ultra low relative humidity for extremely sensitive applications. It is most suitable for applications where equipment may be subject to operation at low temperatures and water vapour condensation must not occur.

60g to 200g Molecular Sieves Filled In-Line Desiccators

60g to 300g Indicating Silica Gel Filled In-Line Desiccators

Flush Mounting Pipe Line Desiccator

1Kg Molecular Sieves & Silica Gel In-Line Dryer (100 PSI Working Pressure)