+603 - 7803 0158

Tilt Indicators


TiltWatch

Plus is actually three separate indicators in a single unit:

  • One section indicates the degree of tilt to the left
  • The second section indicates the degree of tilt to the right
  • The third section indicates total overturn
Activation Angle 10° increments from 30° axis (+/-5%)

First Activation 30° from vertical

Accuracy: +/-5%

Monitoring Range 360° monitoring within a single plane

Adhesive: 1 mil high tack acrylic

Humidity Tolerance: 5% to 99% noncondensing

Temperature Tolerance: -40°F/-40°C to 140°F/60°C

Composition Clear PTE housing and brass, non-magnetic indicator

Size 4.6?x 4.6? x 0.3?, 116.84mm x 116.84mm x 7.62mm

Installation Pressure-sensitive adhesive exposed when liner and arming pin are peeled away

Adhesive Shelf Life 12 months (before application)

TiltWatch XTR

The TiltWatch XTR is single-use tip indicator used to monitor goods that must remain upright. Once applied to the packaging, the TiltWatch XTR will provide evidence of mishandling if the shipment is tipped. However, the tilt indicator remains unaffected by movement resulting from normal handling conditions.

Key Specifications

Activation Angle
80° +/-5% from vertical

Monitoring Range: Single plane

Adhesive: 2 mil high tack acrylic

Humidity Tolerance: 5% to 99% noncondensing

Temperature Tolerance: -40°F/-40°C to 140°F/60°C

Composition Rigid polystyrene housing with non-magnetic steel indicator

Arming: Arms coincident with removal of adhesive liner

Size: 2.9?/73.66mm x 2.7?/68.58mm x 0.2?/5.08mm

Installation Pressure-sensitive adhesive or holes to accommodate screws, nails, or staples

Customization: Private logos available on orders after 3500

Adhesive Shelf Life: 2 years